Alcatel 5042A (Official) USB drivers

Are you looking for the Alcatel 5042A (Official) USB drivers device?
in this post, we share official link to download (Official) USB drivers for Alcatel 5042A. If in case you were already searching for the USB driver of this device, then this page will help you out.

However, you are provided with a step by step manual guide to download and install Alcatel 5042A USB drivers on your computer (Links are provided at the end of the article). We have provided almost all Long handset drivers.

Recommended Alcatel 5042A device tutorials (You should read)

You might want to enable USB debugging for rooting, and firmware flashing purpose on your Alcatel 5042A.

Download Alcatel 5042A official USB drivers.

Alcatel 5042A Qualcomm driver For Flashing Firmware

Name: qualcomm_driver.rar
File size: 9.6MB
Click to Download

Alcatel 5042A ADB driver for Establishing USB Connection

Name: adb_usb_driver.rar
File size: 8.28 MB
Click to Download

How to Install Alcatel 5042A USB Drivers Manually

Step 1: Download and extract the driver on your computer.

Step 2: Open Device Manager and Click on "Action".

Step 3: Now Click on "Add legacy hardware".

Note: If the "Add legacy hardware" option is missing then click on the empty space inside the Device Manager and then click on "Action". Now you should see "Add legacy hardware" option.

Step 4: Click Next.

Step 5: Select "Install the hardware that I manually select from a list (Advanced)".

Step 6: Select "Show All Devices" and Click on "Have Disk..."

Step 7: Click on Browse.

Step 8: Locate the extracted driver manually on your computer.

Step 9: Click Open and then OK.

Step 10: Choose the Driver you want to install and then Click on Next.

Step 11: Your Driver will be installed and listed in the Device Manager.

Step 12: If you see additional drivers in Step 10, then follow the instructions from Step 3 to Step 9 again and choose the driver listed below the one which you have previously installed. Similarly, follow for all the additional drivers.

How to Install Alcatel 5042A and Fastboot Drivers

Step 1: Download the 15 Seconds ADB installer on your PC. If it is in the .zip archive then extract it to obtain the .exe file.

Step 2: Right-click on the file and Run as administrator.

Step 3: It should ask, whether you want to install ADB and Fastboot Driver on PC. Enter "Y" and hit Enter key.

Step 4: Now it should ask whether you want to install ADB system-wide. Enter "Y" and hit Enter.

Step 5: It should ask whether you want to install device drivers. Enter "Y" and hit Enter.

Step 6: Follow the on-screen instructions.

Step 7: Done.


[*] If you are trying to flash stock firmware rom on your device or generally connecting the device to the computer then you can use above driver.

[*] Alcatel 5042A Stock firmware Rom: You can download Alcatel 5042A Stock firmware rom from here

Related Posts

Subscribe Our Newsletter